Pinback pogas, 5.2 x 5.2 cm

Produkta informācija Četrkrāsu druka on the front, aizmugure tukša (4/0) Sheet metal badges to fasten by means of a pin on the back Oeko-Tex® STANDARD 100 certified The front has a glossy or matt film lamination Make sure to add 5 mm bleed on all sides of your artwork in addition to the final dimensions. For round designs, we recommend buttons from 37 mm as such designs may appear off-center on 25 mm buttons due to the production process. Katram drukas pasūtījumam var augšupielādēt tikai vienu motīvu.

Drukas faila prasības Pinback buttons, 5.2 x 5.2 cm Datu formāts : 6,2 x 6,2 cm Apgrieztais izmērs : 5,2 x 5,2 cm Special requirements for creating the artwork: The buttons can only be attached horizontally. We will always turn your artwork according to the text direction to make sure your design is not upside down. font Izmērs: at least 8 pt. Safety margin: 2 mm; Maintaining space between the text/information and the edge of the trimmed format prevents undesirable cuts. Izšķirtspēja: 300 dpi Fonti jāiegulst pilnībā vai jāpārvērš kontūrās Krāsu režīms: CMYK, FOGRA51 (PSO coated v3) for coated paper, FOGRA52 (PSO uncoated v3 FOGRA52) for uncoated paper We will not check for spelling and/or typographical errors We will not check for overprint settings Comments will be deleted and not printed Form field content will be printed How do I create print data correctly?
Drukas faila prasības

Heldenwerbung GmbH Oderstr. 63 14513 Teltow Contact E-mail: kontakt@heldenwerbung.de

Materiāls: Button

Daudzums: Specify higher print run...